380V Motor grease electric lubrication pump for lubrication equipment

1. High working pressure up to 400bar/5800psi
2. For single, double dry oil lubrication system
3. Mobile cart optional

The model of ZPU High Pressure Grease Electric Lubrication Pump is used for lubrication of high frequency, length of pipes is large, intensive lubrication points, nominal pressure of 40MPa, single, double dry oil lubrication system, as the supply of conveyor lubricant. Can also be equipped with mobile cart, high pressure hose, gun and cable to the fat composition of mobile electric lubrication pump for lubrication of low frequency, less lubrication points, to a large and not easily centralized oil lubrication to move to a single device oil lubrication.

ZPU High Pressure Grease Electric Lubrication Pump

The ZPU High Pressure Grease Electric Lubrication Pump is a pump driven by a geared motor unit, a single export of electric discharge lubricant lubrication pump. There are three emission specifications, can be easily formed according to the different needs of the lowest investment in centralized lubrication systems; by its composition, dry oil lubrication with transmission distance, fuel characteristics of small diameter.
Please check the technical information of ZPU high pressure grease electric lubrication pump follow:

How to use ZPU High Pressure Grease Electric Lubrication Pump:

1.The ZPU High Pressure Grease Electric Lubrication Pump should be installed at a suitable temperature, dust, small, easy adjustment, inspection, maintenance, washable and convenient place to make fat.

2.Should wherever possible be located in the center of the system in order to shorten the length of pipes to maintain a minimum pressure drop, the pump can generate enough pressure to overcome the back pressure lubrication points.

3.The first time should be preceded by a certain amount of oil, let the pump run a few minutes after the fat from the mouth to close the way to make use of electric pumps added grease.

4.The beginning of the motor reducer must be used three months after the plug from the exhaust hole 3 # add the right amount of aluminum disulfide lubricant added once every four months later.

5.The ZPU high pressure grease electric lubrication pump for indoor installation type, outdoors or in harsh environment applications use, must take protective measures.

How to order ZPU high pressure grease electric lubrication pump:

1.Ordering with the car's electric lubrication pump mobile device, you must specify the contract length of hose and cable length.

2.Electric lubrication pump system work for the short time intervals, the user for long hours in the contract.