DDB Multi - point lubrication grease pump

Brand Name                         EGMEC

Product                                 Multi- point grease lubrication pump with 10 injection ports

Ordering code                      DDB10

Oil feeding                            0~0.2 mL/time

Feeding time                        13/min

Injection port nos.                 10 ports

Medium                                 Grease

Tank Volume                        7L

Quality control                      Standard testing

Warranty                               One year

Motor power supply             0.37

1. Multi-point lubrication 10 feeding ports

2. Equipped with reliable operation motor

3. Low noise for working condition

    Grease Lubrication Pump DDB10 Type 0.37Kw Motor Power 7L Volume for multi-point lubrication frequency is very low, lubrication point of not more than 50 points, nominal pressure of 10MPa for multi-line centralized lubrication system, oil-dry.

Grease Lubrication Pump DDB10 Type 0.37Kw Motor Power 7L Volume

Directly or through single-chip device to the oil-grease to the lubrication points for the delivery of the device, particularly suitable for crushing machine, forging machine, terminal line of cranes, presses and other small-scale stand-alone device.
The technical information of Grease Lubrication Pump DDB10 Type 0.37Kw Motor Power 7L Volume:

Using the medium for the cone penetration of not less than 265 (25 ℃, 150g) 1/10mm the grease (NLGI0 # ~ 2 #). Working ambient temperature 0 ~ 40 ℃.
Grease Lubrication Pump DDB10 Type 0.37Kw Motor Power 7L Volume: DDB-10, DDB-18, DDB-36.

How to use Grease Lubrication Pump DDB10 Type 0.37Kw Motor Power 7L Volume:
1. The series of Grease Lubrication Pump DDB10 Type 0.37Kw Motor Power 7L Volume should be installed right at ambient temperature, dust a small, easy to fill fat, adjustment, inspection, maintenance and so convenient occasions.
2. DDB series of multi-point dry pumps using the box before the start of a slowdown by adding HL-20 gear oil to the oil standard provisions of liquid.
3. To the Lubrication Pump oil storage device must be used within the lipid supplement SJB-D60 hand-pumps or DJB-200 electric fuel pumps fuel from the oil storage device port to join, pay attention to the inside of an oil storage grease are forbidden to start the motor without operation.
4. According to storage barrels to spin the walls of the spiral to the licensing requirements for electrical wiring, shall not be reversed.
5. Filling the mouth of filter accuracy of not less than 0.2mm, should be regularly cleaned.
6. Dry pumps should always be kept clean, non-fat uncovery fill dirt into the pump body so as not to affect the normal work.